Your browser might display a security message. If you don’t know the IP address of the AirBridge, use the NETGEAR Insight app or another discovery method. Connect your mobile device or computer to the same network where you connected the AirBridge that you are setting up.(Do not connect the LAN2 port on the master directly to your network.) Connect the LAN port on the power adapter to a router or switch on your network.(The default IP address is 192.168.0.100.) To prevent a network loop, set up the AirBridge master first, and then disconnect it from the network before you set up the AirBridge satellite. If the network includes a DHCP server, such as a router, the AirBridge is automatically assigned a new IP address. We recommend that you connect the AirBridge to a network with Internet access during setup. Using any other power source can damage the device. WARNING : Power on the AirBridge only with an Ethernet cable connected to the provided power adapter. Connect the other end of the cable to the PoE port on the power adapter. With the back of the AirBridge facing you, connect an RJ‑45 Ethernet cable (not provided) to the AirBridge 24V PoE port on the RIGHT side of the device.Pull down on the latch on the front of the device and remove the bottom panel of the AirBridge to expose the ports.Follow the instructions on the screen to register the device.Either use the camera on your phone to scan the bar code, or type in the serial number.Enter the email address and password for your account and tap login.If you do not own a NETGEAR account, tap Create NETGEAR Account and follow the onscreen instructions.Open the NETGEAR Insight app on your mobile device.On your mobile device, visit the Apple App Store or Google Play Store, search for NETGEAR Insight, and download the latest version of the app.We recommend that you complete the initial pairing at a staging area with easy access to the network that is to supply connectivity to the master. The master remains connected to the network to provide connectivity to the satellite after you install the satellite at the detached location. However, to configure an access point or client bridge setup, you must use the WBC502 local browser UI.įirst set up the AirBridge master, then set up the AirBridge satellite. Note: You can also use NETGEAR Insight to configure a point-to-point (or point- to multipoint)master‑to‑satellite setup. This installation guide describes how you can use the local browser user interface (UI) to establish a WiFi bridge between two Insight Instant Wireless AirBridge devices in a point‑to‑point master‑to‑satellite setup. 3)LAN2: Optional device for satellite-only Prepare for installation
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |